Autzoo.1122
hacknews
utzoo!henry
Thu Nov 12 22:55:13 1981
CSRG line again
The current procedure for using the CSRG line is as follows (be warned
that it will change again shortly, as I have figured out a way to get
rid of the stupid switch flipping):

	1. Go look at the modem.  If it is turned on, somebody else is
		using the line, go away.
	2. cu dir -l /dev/tty39 -s 9600     you will NOT see "Connected".
	3. Go turn the modem on.  You will NOW see "Connected".  Hit
		RETURN and dear old Dmitri should ask you who you want.
		Tell him, and you should see a login message.
	4. Use the line.  It seems to work ok at 4800.  9600 definitely
		is unusable for serious work.  Note that the 45 and 50
		look for login at 9600 and 2400 but not 4800.
	5. When finished, get out of cu (via ~.).
	6. GO TURN THE MODEM OFF.

In the past I've prescribed a slightly more elaborate disconnect procedure,
involving talking to Dmitri again;  on investigation, this does not seem
to be necessary.

There is a horrible fate in store for the next person who forgets to turn
the modem off after using the line.