Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10 5/3/83; site houxu.UUCP
Path: utzoo!linus!decvax!harpo!gummo!whuxlb!pyuxll!eisx!npoiv!npois!hogpc!houxm!houxu!jhv
From: jhv@houxu.UUCP
Newsgroups: net.micro.atari
Subject: Re: atari port usage
Message-ID: <191@houxu.UUCP>
Date: Fri, 26-Aug-83 01:23:30 EDT
Article-I.D.: houxu.191
Posted: Fri Aug 26 01:23:30 1983
Date-Received: Fri, 26-Aug-83 13:07:31 EDT
References: <286@orion.UUCP>
Organization: Bell Labs, Holmdel NJ
Lines: 7

I have connected a standard terminal to the ATARI 850 - it was straight
forward, connect the data receive and transmit and ground to the right
pins on the terminal and go.  Some terminals may need a "data set ready"
signal to unlock them.

		Jim Van Ornum