Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!decvax!harpo!seismo!hao!hplabs!sri-unix!W8SDZ@mit-mc
From: W8SDZ@mit-mc@sri-unix.UUCP
Newsgroups: net.micro.cpm
Subject: MDM711 and parity/no parity
Message-ID: <3867@sri-arpa.UUCP>
Date: Fri, 5-Aug-83 03:42:00 EDT
Article-I.D.: sri-arpa.3867
Posted: Fri Aug  5 03:42:00 1983
Date-Received: Sun, 7-Aug-83 01:59:35 EDT
Lines: 7

From:  Keith Petersen <W8SDZ@mit-mc>

Add more baud rate options to the SET command in your overlay.  Use
two of each aud rate - one with parity/7 bits and one with no parity
8-bits.  This makes it easily implemented on any system that can be
software controlled.
--Keith