Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!philabs!seismo!rochester!ritcv!kar
From: kar@ritcv.UUCP (Kenneth A Reek)
Newsgroups: net.rec.photo
Subject: Re: Double exposure with the AE-1???
Message-ID: <486@ritcv.UUCP>
Date: Mon, 22-Aug-83 21:49:15 EDT
Article-I.D.: ritcv.486
Posted: Mon Aug 22 21:49:15 1983
Date-Received: Fri, 26-Aug-83 02:40:48 EDT
References: cornell.5079
Lines: 17

tton goes through 3/4 of a revolution,
4) Holding rewind crank still, re-engage sprocket by advancing winding lever
   until it stops,
5) Finish advancing film normally.

	This left the same frame behind the shutter with surprisingly good
accuracy.  I played around a little and found that the 3/4 revolution was not
very critical, presumably due to the construction of the ratchet in the
sprocket.

	This may or may not work on other cameras, and it may require a
different factor (other than 3/4 revolution), but this can be discovered by
experimentation.  If it works, you will have to put a mark on the rewind
button, but so what?

	Ken Reek, Rochester Institute of Technology
	seismo!rochester!ritcv!kar