Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10 beta 3/9/83; site menlo70.UUCP
Path: utzoo!linus!decvax!harpo!seismo!hao!menlo70!sanders
From: sanders@menlo70.UUCP (Rex Sanders)
Newsgroups: net.unix-wizards
Subject: Baud rate cycling problem under 4.1bsd
Message-ID: <170@menlo70.UUCP>
Date: Thu, 18-Aug-83 02:36:33 EDT
Article-I.D.: menlo70.170
Posted: Thu Aug 18 02:36:33 1983
Date-Received: Sat, 13-Aug-83 03:10:27 EDT
Organization: USGS, Menlo Park CA
Lines: 12


  We have a Vax 750 with 16 line Emulex CS21 running 4.1bsd.  We would
like to cycle our plugboard ports between 4800-1200-300 baud.  Seemed
like a very straightforward modification to getty and /etc/ttys.
  However, if you hit BREAK at 4800, the line dies and it takes a
reboot to bring it back to life.  Even tried arranging it to go
300-1200-4800, and you can break from 300 to 1200, but you hang again
breaking from 1200 to 4800.  Other combos (e.g. 9600-1200-300) work.
Am I missing something here?  Any clues are welcome.

-- Rex
   ucbvax!menlo70!sanders     RSanders.Pascalx @ Denver (Arpanet)