Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10 5/3/83; site umcp-cs.UUCP
Path: utzoo!linus!philabs!seismo!rlgvax!cvl!umcp-cs!deba
From: deba@umcp-cs.UUCP
Newsgroups: net.micro.pc
Subject: Request Technical Info on hooking IBM pc to IBM mainframe
Message-ID: <2978@umcp-cs.UUCP>
Date: Wed, 5-Oct-83 00:01:24 EDT
Article-I.D.: umcp-cs.2978
Posted: Wed Oct  5 00:01:24 1983
Date-Received: Fri, 7-Oct-83 04:47:38 EDT
Organization: Univ. of Maryland, Computer Science Dept.
Lines: 25

A friend of mine would like to hook PC to mainframe using ASYNC
communication support program using 2400 bps. This is an emulation
as ASR TTY model 33/35. But it is not clear in the specifications
about what value to specify in the TERM parameter of the macro
statement, which regenerates the 3705 Communication Program (EP mode)
for the Start-Stop ( i.e. asyncronous ) LINE. Which of these parameters
should be specified: TWX or WTTY ? But both these have very very low
bit rates.
  
Example of the macro segment:
       LINE
            LNCTL=SS,
            SPEED=2400,
            CLOCKNG=EXT,
            TERM=           ??????
            CU=2701,
            DUPLEX=FULL,
            MODEM=OPTION2,
            INTPRI=2,
            DIAL=NO,
            CHNPRI=NORMAL,
               ..
            DISABLE=NO
  
  Csnet address: deba@umcp-cs