Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site mit-eddie.UUCP
Path: utzoo!linus!security!genrad!mit-eddie!smh
From: smh@mit-eddie.UUCP (Steven M. Haflich)
Newsgroups: net.micro
Subject: Re: Search for Jumpers ?
Message-ID: <826@mit-eddie.UUCP>
Date: Tue, 18-Oct-83 09:00:33 EDT
Article-I.D.: mit-eddi.826
Posted: Tue Oct 18 09:00:33 1983
Date-Received: Wed, 19-Oct-83 21:03:50 EDT
References: <12184@sri-arpa.UUCP> <944@watcgl.UUCP>
Organization: MIT, Cambridge, MA
Lines: 11

I cannot recommend the following kludge without reservations, but
have used it in years past when expedient without difficulty:

A Unibus NPG jumper can be constructed from a miniature SPST slide
switch wire wrapped to the appropriate backplane pins.  The leads
must be kept short, of course, and the biggest difficulty is
affixing the switch and wires *securely* so they cannot become
caught on anything.  This latter is partcularly important if your
backplane s mounted on slides!

Steve Haflich, MIT Experimental Music Studio