Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 (Tek) 9/26/83; site teklabs.UUCP
Path: utzoo!linus!decvax!microsoft!uw-beaver!tektronix!tekchips!teklabs!keithe
From: keithe@teklabs.UUCP (Keith Ericson)
Newsgroups: net.micro.cbm
Subject: from ROM to RAM
Message-ID: <2571@teklabs.UUCP>
Date: Wed, 19-Oct-83 14:26:26 EDT
Article-I.D.: teklabs.2571
Posted: Wed Oct 19 14:26:26 1983
Date-Received: Sun, 23-Oct-83 15:08:46 EDT
Organization: Tektronix, Beaverton OR
Lines: 30


	I have a cartridge (ROM) FORTH system for the C64 that I would
like to place in and operate from the RAM that underlies the cartridge
- I want to patch the existing stuff to do some funny things to the
system. I can copy the ROMs to disk and from there to the RAM. But I
have yet to be able to (warm or cold) start up the computer so as to
get the RAM program to run successfully. If you have a method of doing
this, or know what I have to patch to get it to do this, I would be very
grateful if you would let me in on the secret(s).

	Note: I'm NOT trying to steal this software. I bought the
	cartridge and I believe I'm within my rights to copy it from
	ROM to RAM. Neither am I going to hand out copies. The cartridge
	is too cheap to steal, anyway.

Keith Ericson at teklabs

 uucp:  ('|' = 'or'):
	    aat | arizona | cbosg | chico | cwruecmp  }
	    decvax | eagle | groucho | harpo | ihnss  }
	     lbl-csam | lbl-unix | mit-dspg | ogcvax  } !teklabs!keithe
	   orstcs | orstcsp | pur-ee | purdue | reed  }
	    ssc-vax | ttc | ucbcad | ucbopt | ucbvax  }
	unc | uophysics | watcgl | watmath | zehntel  }

 ARPAnet:       keithe.tek@rand-relay
 USPS:          Keith Ericson
		Electronic Systems Laboratory
		Tektronix, Inc.   MS 50-383
		PO Box 500
		Beaverton OR 97077 Phone:          503-627-6042