Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1exp 10/6/83; site ihuxm.UUCP
Path: utzoo!linus!philabs!cmcl2!floyd!harpo!eagle!mhuxi!houxm!ihnp4!ihuxm!berman
From: berman@ihuxm.UUCP
Newsgroups: net.micro.pc
Subject: Lotus 123 / Gemini 10X Interface Problem
Message-ID: <639@ihuxm.UUCP>
Date: Tue, 18-Oct-83 10:26:37 EDT
Article-I.D.: ihuxm.639
Posted: Tue Oct 18 10:26:37 1983
Date-Received: Wed, 19-Oct-83 22:36:59 EDT
Organization: AT&T Bell Labs, Naperville, Il
Lines: 24


A problem dumping Lotus 123 graphics to my Gemini 10X dot matrix printer:
After printing about 10 lines, a few unwanted line feeds occur, consistently.
The obvious solution of playing with the Gemini Dip Switches that control
carriage return and linefeed interpretation doesn't help.
Gemini is an Epson MX80 "lookalike". 
Either the problem is in my Lotus prrinter setup parameters or in the Gemini.

Any ideas?
Graphs look like:

       ____
       |  |
       |  |

       |  |
       |  |  ----

       |  |  |  |
------------------------


ihnp4!ihuxm!berman