Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site linus.UUCP
Path: utzoo!linus!ell
From: ell@linus.UUCP (Edward L. Lafferty)
Newsgroups: net.rec.wood
Subject: Re: veneering information wanted
Message-ID: <400@linus.UUCP>
Date: Thu, 20-Oct-83 21:22:12 EDT
Article-I.D.: linus.400
Posted: Thu Oct 20 21:22:12 1983
Date-Received: Fri, 21-Oct-83 07:18:07 EDT
References: <171@ccieng5.UUCP>
Organization: MITRE Corp., Bedford MA
Lines: 15

There are several excellent reference works on veneering, both press
and hammer (had) type. You should subscribe to one one of the catelogs
of the fine tool houses: Woodcraft Supply Corp, Woburn, MA; Constantine
and Son, New York, NY; etc. THese carry all the books on woodworking
you will ever need, including veneering and the veneers, too
(Constantine is a specialist in veneers). 

Also the catelogs are fun to read, but the tools are expensive and if
you are bitten by the woodworking bug, you may lose a few bucks.


				---Cheers
			         Ed Lafferty
				 MITRE Corp. <linus!ell>