Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1exp 11/4/83; site ihuxx.UUCP
Path: utzoo!linus!decvax!harpo!floyd!clyde!ihnp4!ihuxx!ignatz
From: ignatz@ihuxx.UUCP (Dave Ihnat, Chicago, IL)
Newsgroups: net.micro.cpm
Subject: CCP and MOVCPM
Message-ID: <604@ihuxx.UUCP>
Date: Wed, 30-Nov-83 04:13:59 EST
Article-I.D.: ihuxx.604
Posted: Wed Nov 30 04:13:59 1983
Date-Received: Thu, 1-Dec-83 23:23:35 EST
Organization: AT&T Bell Labs, Naperville, Il
Lines: 23

Ok, guys...I'm at the disassembly stage, and would prefer to avoid it
if I can...so let's see if I can get some use out of the net.

I've an Osborne I with CP/M 2.2, and have been using ZCPR1 for some
time. (Yah, I know, but it's hardly worth the effort to put ZCPR2 on
an Osborne...)  Recently, I purchased a real-time clock that requires
me to do a MOVCPM of 1K.  Ok, no problem...but it lost my CCP!  By
lost I mean...it somewhere got a copy of the old CCP!  Obviously, I've
tried to recompile ZCPR with the new offset, and it goes into
never-never land when force-fed to the moved CP/M.  So my query is:

	-Where is the old CCP coming from? (I've used DU to search the
	 diskette for byte strings characteristic of CCP--no luck)

	-Has anyone else tried to install ZCPR on a MOVCPM'd system?  Any
	 problems? (Particularly with an Osborne...)

I'm not holding my breath, but I'd love a response....

				Thnx,

				Dave Ihnat
				ihuxx!ignatz