Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10 5/3/83; site aplvax.UUCP
Path: utzoo!linus!security!genrad!grkermit!masscomp!clyde!floyd!harpo!seismo!rlgvax!cvl!umcp-cs!aplvax!eric
From: eric@aplvax.UUCP
Newsgroups: net.wanted,net.unix-wizards
Subject: uucp over Sytek local network
Message-ID: <410@aplvax.UUCP>
Date: Thu, 10-Nov-83 10:32:56 EST
Article-I.D.: aplvax.410
Posted: Thu Nov 10 10:32:56 1983
Date-Received: Thu, 17-Nov-83 01:07:29 EST
Organization: JHU/Applied Physics Lab, Laurel, MD
Lines: 16


	I am trying to adapt uucp to work over the Sytek local
network. I can get it to establish the circuit, and log in, but
it fails in the transfer. My assumption is that this is because
the uucp protocol wants a full eight bit transfer, and Sytek
does not provide a full eight bit transparent data path. My question
is, has anyone modified uucp to work over the Sytek net (or
developed a protocol for it that does not require 8 bits?). Right
now I am looking at breaking up every six bytes into 8 (I not only
can't use the top bit, I also have to avoid XON/XOFF). If someone
has a better way, I would like to hear about it. Thanks for any
help that you can give me.

-- 
					eric
					...!seismo!umcp-cs!aplvax!eric