Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!decvax!harpo!floyd!clyde!ihnp4!inuxc!pur-ee!uiucdcs!trsvax!jsf007
From: jsf007@trsvax.UUCP
Newsgroups: net.auto
Subject: Re: 1977 Cutlass hesitation!!! - (nf)
Message-ID: <4222@uiucdcs.UUCP>
Date: Tue, 29-Nov-83 23:08:31 EST
Article-I.D.: uiucdcs.4222
Posted: Tue Nov 29 23:08:31 1983
Date-Received: Thu, 1-Dec-83 23:09:41 EST
Lines: 11

#R:ccivax:-12300:trsvax:55200022:000:373
trsvax!jsf007    Nov 28 13:00:00 1983

The problem is simple:  the choke is set too lean.  If you look at the 
choke cover, you will notice three lock screws and some arrows pointing
to the rich and lean directions.  On the housing, you will see some tick
marks.  The marks usually indicate 10 degrees F.  Try setting the choke
10 deg. at a time until the problem goes away.

				S. Fintel
				...!trsvax!jsf007