Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site inuxe.UUCP
Path: utzoo!linus!decvax!genrad!grkermit!masscomp!clyde!ihnp4!inuxc!inuxe!wje
From: wje@inuxe.UUCP (W Erwin)
Newsgroups: net.micro.atari
Subject: horizontal bars
Message-ID: <628@inuxe.UUCP>
Date: Thu, 10-Nov-83 14:41:18 EST
Article-I.D.: inuxe.628
Posted: Thu Nov 10 14:41:18 1983
Date-Received: Fri, 11-Nov-83 06:48:41 EST
Organization: AT&T Consumer Products Div., Indianapolis
Lines: 15


I have also experienced the horizontal bars on my atari 800.
However, the common fix of putting capacitors across the power supply
didn't help my situation.
I also looked at the power system with a scope and could find nothing
unusual.
I even had another 800 open at the same time and compared the two systems.
Then i resorted to basics - see if anything feels unusually warm.
I found that one of my large filter capacitors (4700 UF i believe) was
much warmer than the other.
The capacitors on the other 800 i was using for comparison were cool.
I would have thought that a defect of this kind would reflect in high ripple
and/or low input voltage into the regulator but neither was the case.
At any rate, replacing the capacitor fixed the problem.
Good luck.