Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!decvax!harpo!eagle!mhuxl!mhuxm!pyuxi!u1100a!dwz
From: dwz@u1100a.UUCP
Newsgroups: net.rec.wood
Subject: gluing together boards
Message-ID: <385@u1100a.UUCP>
Date: Wed, 9-Nov-83 11:19:54 EST
Article-I.D.: u1100a.385
Posted: Wed Nov  9 11:19:54 1983
Date-Received: Thu, 10-Nov-83 13:03:51 EST
Lines: 8

When I glue together boards, the edges do not always line
up. As a result, I wind up sanding down the entire surface
to get rid of the edges between boards. If the entire surface
is not sanded, and just the ridges, the board (looked at from the
end) follows a wave pattern.
Question: Is there any way to minimize the ridges between
boards when gluing them together? Any help would be appreciated.
					Don Zobre