Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10 5/3/83; site shark.UUCP
Path: utzoo!linus!decvax!tektronix!tekgds!tekecs!shark!tims
From: tims@shark.UUCP (Tim Stoehr)
Newsgroups: net.auto
Subject: Request for tire rotation information.
Message-ID: <136@shark.UUCP>
Date: Fri, 2-Dec-83 13:29:27 EST
Article-I.D.: shark.136
Posted: Fri Dec  2 13:29:27 1983
Date-Received: Sun, 4-Dec-83 08:52:51 EST
Organization: Engineering Computing Systems, Tektronix, Inc
Lines: 11

I own an almost new NISSAN Pulsar 2-door hatchback, which is a front wheel
drive car.  It has bridgestone steel belted radials on it.  I was thinking
that I could get away with not rotating the tires, and just replace the
front tires when they wear out, also the rear ones, but they may not need
it for quite a while, especially since my car is driven unladen most of the
time.  The question is, first, is the above acceptable?  And if it is, I
would like to put Michelen steel belted radials on the front, leaving the
Bridgestone steel belted radials on the back, is this OK?

			Responses appreciated by mail or net
			Tim Stoehr