Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10 5/3/83; site hou2d.UUCP
Path: utzoo!linus!security!genrad!grkermit!masscomp!clyde!ihnp4!houxm!hou2d!5121cal
From: 5121cal@hou2d.UUCP (C.LEISING)
Newsgroups: btl.micro,net.micro,net.micro.cpm
Subject: Re: KAYPRO as a terminal - Thanks!
Message-ID: <189@hou2d.UUCP>
Date: Wed, 21-Dec-83 14:57:39 EST
Article-I.D.: hou2d.189
Posted: Wed Dec 21 14:57:39 1983
Date-Received: Sat, 24-Dec-83 11:24:11 EST
Organization: Bell Labs, Holmdel NJ
Lines: 19

I'd like to thank everyone who took the time to reply
to my request for advice on getting a KAYPRO II to emulate
a terminal. Based on the responses I received, I was able
to determine that my machine had a hardware problem and not
an incorrect configuration or a design flaw. The problem was
fixed by a brute force repair by my dealer (replacement of the
mother board). A quick summary of the replies I received:
	-The KAYPRO should work fine with various modems at
reasonable line speeds (e.g., 1200 baud). Also, the MODEM7
and KMDM795 modem programs provide decent uploading/downloading
file transfer capability.
	-It's necessary to match the terminal configuration
to the desired remote system, including baud rate, number of
data and stop bits, and parity (we use 8 data bits, 1 stop bit,
and no parity).
Thanks again!

Chris Leising		AT&T Bell Laboratories
hou2d!5121cal		Freehold, N. J.