Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!decvax!duke!mcnc!ecsvax!jhb
From: jhb@ecsvax.UUCP
Newsgroups: net.micro.apple
Subject: Re: Apple Communication card modification
Message-ID: <1657@ecsvax.UUCP>
Date: Mon, 5-Dec-83 17:42:50 EST
Article-I.D.: ecsvax.1657
Posted: Mon Dec  5 17:42:50 1983
Date-Received: Fri, 9-Dec-83 06:20:54 EST
References: sdccs6.1218
Lines: 9

To speed up a Communications card to 9600 baud:
1. Make the modification in the manual for 4800 buad.
{15 of A2. Chip A1 still isn't required.
3. Cut the trace from A1 pin 2 to pin 38 of the edge connector and wire it
to pin 37 instead (this won't work on the new cards with gold edge connectors
as they don't have a contact for pin 37).

-Joe Budge
Apple Computer