Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!philabs!seismo!hao!hplabs!sri-unix!jlapsley%D.CC@berkeley
From: jlapsley%D.CC%berkeley@sri-unix.UUCP
Newsgroups: net.micro.cpm
Subject: Re: U.S. Robotics S-100 1200 baud modem: a note
Message-ID: <14562@sri-arpa.UUCP>
Date: Mon, 19-Dec-83 00:58:14 EST
Article-I.D.: sri-arpa.14562
Posted: Mon Dec 19 00:58:14 1983
Date-Received: Fri, 16-Dec-83 03:29:04 EST
Lines: 16

From:  The tty of Phil Lapsley <jlapsley%D.CC@berkeley>

   I have not yet brought up a MDM712/714 on the beast, but I intend to
do so shortly.  I have been using another terminal program of mine which
dials ala D.C. Hayes, and it works fine.

   The way the thing is set up, it responds to pretty much all the D.C.
Hayes commands except most of the "ATSx=y" commands, since they tend to
be a bit on the useless side, with a few exceptions.  So any command
in the form "ATDTnumber" followed by a return will work with the U.S.R.
just fine.

   When/if I get 714 running on it, I will let you know what happens.

					Phil
				<jlapsley%D.CC@Berkeley>