Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10 5/3/83; site umn-cs.UUCP
Path: utzoo!linus!philabs!seismo!harpo!eagle!mhuxl!ihnp4!stolaf!umn-cs!smith
From: smith@umn-cs.UUCP
Newsgroups: net.rec.photo
Subject: Re: Slide Projectors - (nf)
Message-ID: <381@umn-cs.UUCP>
Date: Wed, 14-Dec-83 21:04:47 EST
Article-I.D.: umn-cs.381
Posted: Wed Dec 14 21:04:47 1983
Date-Received: Sat, 17-Dec-83 03:11:15 EST
Sender: notes@umn-cs.UUCP
Organization: Computer Science Dept., U of Minn, Mpls, MN
Lines: 18

#R:druxm:-73000:umn-cs:9000012:000:562
umn-cs!smith    Dec 14 13:38:00 1983

Re: Problem with Sawyer's circular trays

Aside from the problem I mentioned previously (they don't fit Carousel
projectors that every AV department has) they DO have a mechanical
problem compared to Carousels.  The Sawyer trays use little springs
to hold the slides in place.  If the springs loosen enough (or you push
a slide 'just right') slides can fall out of the trays.  Not so with
Carousel trays which have a retaining ring that clamps the slides
in place.

  In practice, though, I've had almost no trouble with slides falling
out of my trays...

Rick.