Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10 5/3/83; site rayssd.UUCP Path: utzoo!linus!decvax!harpo!eagle!allegra!rayssd!dhb From: dhb@rayssd.UUCP Newsgroups: net.info-terms Subject: Re: z29 evaluation - (nf) Message-ID: <343@rayssd.UUCP> Date: Fri, 13-Jan-84 12:31:11 EST Article-I.D.: rayssd.343 Posted: Fri Jan 13 12:31:11 1984 Date-Received: Sun, 15-Jan-84 00:26:08 EST References: <3740@hp-pcd.UUCP> Organization: Raytheon Co., Portsmouth RI Lines: 21 Anything you can do from the MENU on the Z29 you can do under program control. Get a copy of the Z-29 User's & Technical Guide and read appendix B. I defines all the escape sequences for everything you could possibly want to do (the appendix is 20 pages long). In the meantime, to switch between block and underline cursor try the following: x4 ==> block cursor y4 ==> underline cursor In reviewing the manual to make sure I had the escape sequences right I am forced to partially retract my earlier statement. It appears that you cannot switch between blinking and non-blinking cursor from program control. Oh well.... -- Dave Brierley Raytheon Co.; Portsmouth RI; (401)-847-8000 x4073 ...!decvax!brunix!rayssd!dhb ...!allegra!rayssd!dhb ...!linus!rayssd!dhb