Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site unc.UUCP
Path: utzoo!linus!decvax!duke!mcnc!unc!howell
From: howell@unc.UUCP (William Howell)
Newsgroups: net.micro
Subject: Re: TWO PRINTERS WITH WORDSTAR
Message-ID: <6535@unc.UUCP>
Date: Tue, 10-Jan-84 09:12:21 EST
Article-I.D.: unc.6535
Posted: Tue Jan 10 09:12:21 1984
Date-Received: Wed, 11-Jan-84 04:05:46 EST
References: <15132@sri-arpa.UUCP>, <239@hlhop.UUCP>
Organization: CS Dept., U. of N. Carolina at Chapel Hill
Lines: 13

I have been running Wordstar (3.3) under CP/M on an APPLE IIe driving
an EPSON MX80 using a Grappler interface.  Recently, I have added a
DIABLO 630 and APPLE's Super Serial Card and have been successful in
driving the 630 from Wordstar when the super serial card is in slot 1
of the Apple.  This required the removal of the Grappler a situation
I would prefer to avoid.

Ideally I would like to have the Grappler and Super Serial Card
installed at all times.  I have been unsuccessful in getting Wordstar
(possibly CP/M?) to drive a printer connected to any slot other than
slot 1.  Is anyone familiar with how I can do this or is it an
impossibiility??  Thanks!