Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 8/24/83; site garfield.UUCP
Path: utzoo!utcsrgv!garfield!jeff1
From: jeff1@garfield.UUCP (Jeff Sparkes)
Newsgroups: net.micro.6809
Subject: Help with 64K expansion
Message-ID: <791@garfield.UUCP>
Date: Tue, 10-Jan-84 13:14:49 EST
Article-I.D.: garfield.791
Posted: Tue Jan 10 13:14:49 1984
Date-Received: Tue, 10-Jan-84 14:51:45 EST
Organization: Memorial University, St. John's, NF
Lines: 14


	I bought a 64K expansion kit from Jameco, but I don't fully 
understand the installation instructions.  They say:
	"Remove or disconnect the follwing capacitiors" and then proceed to
list 8 capacitors.  The capacitors in question are located between the
RAM chips.  (Specifically, they are the left capacitor of the pair.)
What I don't understand is should I just yank the capacitors out and leave a 
break in the circuit, or put some solder in between so that the circuit
is complete? 
	I know next to nothing about this stuff, so I need HELP!!!!

					64K is only chips away!
					Jeff Sparkes
				(utcsrgv||allegra||ihnp4)!garfield!jeff1