Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site harpo.UUCP
Path: utzoo!linus!decvax!harpo!notes
From: notes@harpo.UUCP
Newsgroups: net.micro.apple
Subject: Printer with serial & parallel input - (nf)
Message-ID: <2180@harpo.UUCP>
Date: Wed, 11-Jan-84 21:04:32 EST
Article-I.D.: harpo.2180
Posted: Wed Jan 11 21:04:32 1984
Date-Received: Fri, 13-Jan-84 04:45:44 EST
Sender: notes@harpo.UUCP
Organization: AT&T Bell Laboratories, Whippany
Lines: 21

#N::37600004:000:693
!bob    Jan 11 15:22:00 1984



I am looking for a dot matrix printer which I can use with an Ann Arbor 
Ambassador terminal driven off a main frame as well as with my Apple 2+.
The Ann ARbor requires an RS232 interface.   My inclination is that the
Apple is most commonly used with a parallel interface & that I would be 
better off with one.   Can anyone recommend a dot matrix printer with
reasonable quality which has both parallel 7 serial interfaces?   Is there
an external box which could convert the Ann Arbor to parallel?  Finally
does anyone have a serial based printer running with the Apple2 who
could pass on personal experience?
						R. L. Carroll
						BTL Whippany,NJ
						201-386-2609
						harpo!bob
.