Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!linus!philabs!seismo!hao!hplabs!sri-unix!cpmlist@brl-vgr From: cpmlist%brl-vgr@sri-unix.UUCP Newsgroups: net.micro.cpm Subject: Information needed. Message-ID: <15881@sri-arpa.UUCP> Date: Mon, 23-Jan-84 14:26:19 EST Article-I.D.: sri-arpa.15881 Posted: Mon Jan 23 14:26:19 1984 Date-Received: Fri, 27-Jan-84 09:00:16 EST Lines: 28 From: Dave Towson (info-cpm) I received the attached message from EDELHEIT@MITRE requesting information on the availability of a Christensen-protocol program that will run on his main- frames. Knowing nothing about CMS, I have responded with information about the Fortran programs in , and the C programs in , both on Simtel20, and the KERMIT programs (different protocol) on Columbia-20. If anyone has any other/better ideas please pas them along to Jeff with an info copy to me so I'll know the answer if the question comes up again. Thanks. Date: 23 Jan 1984 0:34:49 EST (Monday) From: Jeffrey Edelheit Subject: Adding me to the distribution list and a communications question To: info-cpm-request@mit-mc Cc: edelheit@mitre I own an Osborne 1. It currently is a single density machine. I have been using MODEM7 for communications, but have found that I can't transmit files to either the C/70 or 4341, running CMS, that MITRE has here. Does anyone know of a program, preferably in the public domain, that will permit me to pass files from a CP/M machine to a larger, non-CP/M host? Virtually all the files I am attempting to pass are *.prn files. Thanks, Jeff Edelheit