Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10 5/3/83; site heurikon.UUCP
Path: utzoo!linus!philabs!seismo!uwvax!heurikon!jeff
From: jeff@heurikon.UUCP
Newsgroups: net.misc,net.wanted,net.physics
Subject: Help needed with double pane windows
Message-ID: <182@heurikon.UUCP>
Date: Sun, 22-Jan-84 17:35:57 EST
Article-I.D.: heurikon.182
Posted: Sun Jan 22 17:35:57 1984
Date-Received: Mon, 23-Jan-84 04:25:06 EST
Organization: Heurikon Corp., Madison WI
Lines: 27

I have a problem at my house with some double pane windows.  They
are pre-built units, about four feet square.  There is moisture
buildup between the panes which, depending on conditions,
condenses on the inside surfaces of the glass, thus obscuring
the view.  It's like living inside a fog bank all the time.

The moisture finds its way in very slowly from condensation and
rain on the outside surfaces.  We live in Wisconsin.  The windows
face west.

My solution for the *first* window that started this was to have
it replaced, but now three others are doing it too, and I'm afraid
it'll get the new one eventually.  I'd like to drill some very
small holes in the corners of the inside pane to give some escape
path for the moisture, but I don't know if that would help or
hurt, or if that can even be done without breaking the glass.
---
I wasn't sure if this should go in net.physics too, but after
reading all the discussions about freezing coke and ice skating,
I felt it might belong.  Maybe some scientist already has a simple
and unique solution to this problem.)
---
Reply by mail please.  Thanks. 
-- 
/"""\	Jeffrey Mattox, Heurikon Corp, Madison, WI
|O.O|	{harpo, hao, philabs}!seismo!uwvax!heurikon!jeff  (news & mail)
\_=_/		    {ihnp4, allegra}!uwvax!heurikon!jeff  (mail)