Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 exptools 1/6/84; site ihu1g.UUCP
Path: utzoo!watmath!clyde!burl!we13!ihnp4!ihu1g!fish
From: fish@ihu1g.UUCP (Bob Fishell)
Newsgroups: net.audio
Subject: Re: Need Help w/ Turntable
Message-ID: <296@ihu1g.UUCP>
Date: Fri, 20-Apr-84 14:07:53 EST
Article-I.D.: ihu1g.296
Posted: Fri Apr 20 14:07:53 1984
Date-Received: Sat, 21-Apr-84 02:12:09 EST
References: <282@houxb.UUCP> <317@mddc.UUCP>
Organization: AT&T Bell Labs, Naperville, IL
Lines: 19

Sounds like you might have a worn, mismounted, or miswired stylus
on your turntable, but I couldn't tell without listening to it.
I would recommend taking it to a knowledgeable dealer for inspection.
However, the problem might be in the way you've connected up your
system.  If your preamp or amp or receiver has a moving coil/moving
magnet switch, try experimenting with that.  Also, make sure the
turntable is connected to the right set of jacks.

Your tapes seem to sound better with the Dolby circuit off because
Dolby encoding preemphasizes and compresses the treble, and then
deemphasizes and expands it on playback.  It sounds "better" just
because you're hearing more of the highs.  Try switching the NR
back on and touching up the treble a bit with the tone controls
on your amp.  You're not getting the most out of your tape deck
listening to it without it.
-- 

                               Bob Fishell
                               ihnp4!ihu1g!fish