Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 Fluke 1/4/84; site fluke.UUCP
Path: utzoo!linus!decvax!harpo!seismo!hao!hplabs!tektronix!uw-beaver!ssc-vax!fluke!joe
From: joe@fluke.UUCP (Joe Kelsey)
Newsgroups: net.bugs.uucp
Subject: condevs support for Vadic 212 and Vadic VA811S (4.2bsd uucp)
Message-ID: <1525@vax4.fluke.UUCP>
Date: Wed, 11-Apr-84 19:44:47 EST
Article-I.D.: vax4.1525
Posted: Wed Apr 11 19:44:47 1984
Date-Received: Sun, 15-Apr-84 01:25:10 EST
Organization: John Fluke Mfg. Co., Everett, WA
Lines: 20

Here are the changes to condevs.c to support Vadic 212 dialers and
Vadic VA811S dialers.  The Vadic 212 is similar to the VA3451, but
better.  The basic dialing code is almost the same, some of the prompts
have changed.  The same goes for the VA811S - it is almost the same as
the VA811M, but with some operatonal differences.  Since there is no
MACS support, you don't need to worry about modem addresses and such.
Also, the modem and dialer share the same tty line, making it easier to
interface.  (By the way, if anyone is interested in converting a VA811M
to a VA811S, I'd be willing to document my personal horror stories...)

Anyway, here are our changes to condevs.c.  There are a couple of other
miscellaneous changes not related to the new dialer code.  There are a
couple of changes to the Micom support to match our Micom prompts and I
also modified the VADIC code to use the constant TRYCALLS instead of 5
in the for loop which redials the call.  Btw, why isn't there any
reference to TRYCALLS anywhere in the code?  Did you just give up on
using it or what?

/Joe Kelsey			John Fluke Mfg. Co., Inc.
(206)356-5933			uw-beaver!fluke!joe