Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site vax135.UUCP
Path: utzoo!watmath!clyde!akgua!mcnc!decvax!ucbvax!vax135!martin
From: martin@vax135.UUCP (Martin Levy)
Newsgroups: net.bugs.uucp
Subject: re:  uucp vs sytek
Message-ID: <661@vax135.UUCP>
Date: Sun, 22-Apr-84 20:01:41 EST
Article-I.D.: vax135.661
Posted: Sun Apr 22 20:01:41 1984
Date-Received: Mon, 23-Apr-84 07:17:00 EST
Organization: AT&T Bell Labs, Holmdel, NJ
Lines: 12

If you want to use the same boxs for users and uucp then trick is to
get command of the box and then change it's mode from normal operation
(flow xon, cmd none, parity even) to have a command strings (esc,del).
Then call the remote machine and change the modes to ones that uucp
will like (cmd none,flow none,parity none) on both ends.  Then You can
uucp without problems on the same ports as normal users.  I used
/etc/getty to reset the options when it started up, even if the
previous user was not uucp.  This all can be fogotten if you have eia
flow control.

martin.