Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site pucc-i
Path: utzoo!watmath!clyde!floyd!harpo!ihnp4!inuxc!pur-ee!CS-Mordred!Pucc-H:Pucc-I:ags
From: ags@pucc-i (Seaman)
Newsgroups: net.micro.apple
Subject: Apple Pascal (Inverse Video)
Message-ID: <243@pucc-i>
Date: Wed, 28-Mar-84 18:11:32 EST
Article-I.D.: pucc-i.243
Posted: Wed Mar 28 18:11:32 1984
Date-Received: Fri, 30-Mar-84 01:01:49 EST
References: <6983@unc.UUCP>
Organization: Purdue University Computing Center
Lines: 20

There are two ways to put your Apple into inverse video mode from Pascal:

1.  This seems to apply only if you are running with HAS LOWER CASE=FALSE
    in your SYSTEM.MISCINFO.  This is the default value and is appropriate
    for an Apple II+.  Inverse video can be used to represent upper case
    letters, with normal video for lower case.  On the //e, this mode
    should be disabled by running SETUP and setting HAS LOWER CASE=TRUE.

2.  This applies if you are using a //e with the Apple 80-column card.  
    If a program writes CTRL-O to the CONSOLE:, it enables inverse video.
    To turn off inverse video, send a CTRL-N.  These codes are not
    operative if typed in from the keyboard; they must be written by
    a program.  (Possibly the program echoed back what you typed?)
-- 

Dave Seaman
..!pur-ee!pucc-i:ags

"Against people who give vent to their loquacity 
by extraneous bombastic circumlocution."