Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.1 (Tek) 9/26/83; site tektronix.UUCP Path: utzoo!linus!vaxine!wjh12!genrad!decvax!harpo!ihnp4!zehntel!tektronix!joels From: joels@tektronix.UUCP (Joel Swank) Newsgroups: net.micro.cbm Subject: Re: C64 Disk Drive Question Message-ID: <2372@tektronix.UUCP> Date: Mon, 30-Apr-84 09:09:36 EST Article-I.D.: tektroni.2372 Posted: Mon Apr 30 09:09:36 1984 Date-Received: Wed, 25-Apr-84 04:32:21 EST References: <867@omsvax.UUCP> Organization: Tektronix, Beaverton OR Lines: 52 VDOS A hackers package for the AIM-65 and the 1541 disk drive has been developed by Don Lewis. This package contains the software to interface a Rockwell AIM-65 (6502 based) microcomputer to the commodore 1541 disk drive. The software is provided on a 1541 diskette in both object and Commodore compatable assembler source. Altho this package is meant to give the AIM user low cost disk storage, It could easily be adapted to another 6502 based microcomputer by an assembler language programmer. It also might be of use to C64 programmers since it could allow disk communications with the kernal ROM switched out. Source files included: (all assembler source to run on the AIM) VDOS - equivalent to dos wedge + AIM user I/O AIM assembler interface. LOAD/SAVE CBM files. Random sector read/write Offset loader for object files. Move and relocate program. Disassembler Single disk backup. Program to interrogate memory in the 1541 (plus several more) Hardware required: 5 bits of a VIA (CIA or PIA) 7406 open collector buffer resistors connectors cable Package includes: AIM cassette 1541 diskette 6 pin din connector manual Anyone interested should call or write: Don Lewis POB 521 Folsom PA 19033 (215) 622 5495 I have been using VDOS on my AIM for several months. I have modified it to suit my own needs. I find it very usefull for communication between my computers. Joel Swank Tektronix, Beaverton OR