Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site sultan.UUCP
Path: utzoo!watmath!clyde!floyd!harpo!decvax!sultan!ras
From: ras@sultan.UUCP (Robert A. Surtees - SAC group)
Newsgroups: net.micro.hp
Subject: Module locations on HP41
Message-ID: <131@sultan.UUCP>
Date: Fri, 23-Mar-84 13:08:00 EST
Article-I.D.: sultan.131
Posted: Fri Mar 23 13:08:00 1984
Date-Received: Sun, 25-Mar-84 09:22:35 EST
Lines: 26

I have an HP41CV together with the following modules:
- Extended Memory/Functions
- Extended Memory
- Timer
- Home Management Applications Pack
- Wand
- Printer

With only 4 slots, they won't all plug in at the same time, so I have
to keep swapping in and out.  The question is, does anyone know all of
the restrictions on which ports these can occupy?  I have tried various
combinations and every now and then I get a MEMORY LOST error.

I would like to keep the first 4 plugged in all of the time and would
like to use the wand in place of the Home Management Pack.

I would also like to use the printer occasionally with the Home Management
Pack by switching it with the Extended Memory module.

In which slots do I place the first four modules?

Thanks.
-- 
Robert A. Surtees           603/881-1605        Digital Equipment Corporation 
..!decvax!sultan!ras                        110 Spit Brook Rd, Nashua NH 03062
______________________________________________________________________________