Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!vaxine!wjh12!genrad!decvax!mcnc!ecsvax!hsplab
From: hsplab@ecsvax.UUCP
Newsgroups: net.micro.pc
Subject: IBM monitor
Message-ID: <2272@ecsvax.UUCP>
Date: Sun, 8-Apr-84 01:40:31 EST
Article-I.D.: ecsvax.2272
Posted: Sun Apr  8 01:40:31 1984
Date-Received: Mon, 9-Apr-84 03:45:15 EST
Lines: 13

<>
Both the Lear Siegler ADM-22 and the IBM-PC monochrome monitor are made
by the Taiwan electronics company TEC.  In fact, the cases are very
similar and the controls on our ADM-22 were "glued" in the same fashion
as you described.  Even the deflection yoke was glued and in one case,
this presented read problems on one ADM-22 we had on which the yoke was
tilted slightly.  I wonder if anyone has looked into using the Lear-Siegler
as a source of replacement parts (both use the same green screen CRT tube,
at least by inspection) for the PC monitor.

David Chou
Univ of NC, Chapel Hill
     decvax!mcnc!ecsvax!hsplab