Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1.chuqui 4/7/84; site nsc.UUCP
Path: utzoo!linus!decvax!harpo!ihnp4!zehntel!hplabs!nsc!chuqui
From: chuqui@nsc.UUCP (Chuq Von Rospach)
Newsgroups: net.unix-wizards,net.text
Subject: QMS lasergraphic printers and ditroff
Message-ID: <880@nsc.UUCP>
Date: Sun, 22-Apr-84 22:20:18 EST
Article-I.D.: nsc.880
Posted: Sun Apr 22 22:20:18 1984
Date-Received: Tue, 24-Apr-84 00:56:07 EST
Organization: National Semiconductor, Sunnyvale
Lines: 17

Has anyone out there written a post processor for ditroff for the QMS
laser printers? I don't like rewriting the wheel if I can help it. It looks
like I can get it up by using the CAT post processor and the QCAT
translator, but that seems like a significant efficiency dig that I'd like
to avoid if I can.

Has anyone out there integrated a QMS (or any laser printer, for that
matter) into the 4.2 Spooler? It looks like a fairly straightforward setup,
but if you know of a trap for the unwary, I'd appreciate hearing about it.

chuq

-- 
From under the bar at Callahan's:		Chuq Von Rospach
{amd70,fortune,hplabs,menlo70}!nsc!chuqui	(408) 733-2600 x242

Never give your heart to a stranger, unless you are sure that you are dead.