Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10 5/3/83; site umcp-cs.UUCP
Path: utzoo!watmath!clyde!akgua!mcnc!decvax!harpo!seismo!rlgvax!cvl!umcp-cs!chris
From: chris@umcp-cs.UUCP
Newsgroups: net.unix-wizards
Subject: Re: RM02 Driver needed for Sys III 11/44
Message-ID: <6638@umcp-cs.UUCP>
Date: Fri, 20-Apr-84 16:05:15 EST
Article-I.D.: umcp-cs.6638
Posted: Fri Apr 20 16:05:15 1984
Date-Received: Sun, 22-Apr-84 08:40:59 EST
References: <9723@arizona.UUCP>
Organization: Univ. of Maryland, Computer Science Dept.
Lines: 11

Well, if the way we have our new Emulex configured is really an "rm02",
then all you need to do is pretend it's an RM03 or RM05 with a different
size & number of sectors per track.  It wasn't hard to change the 4.1
driver for a new 48sec/trk drive [the ``hard'' part for us was setting
thing up so that we could keep our RP06s as NOBADSECT disks while still
using the bad sector forwarding code for our RM02s; I made it a config
file option].
-- 
In-Real-Life: Chris Torek, Univ of MD Comp Sci (301) 454-7690
UUCP:	{seismo,allegra,brl-bmd}!umcp-cs!chris
CSNet:	chris@umcp-cs		ARPA:	chris.umcp-cs@CSNet-Relay