Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10 5/3/83; site uw-june
Path: utzoo!watmath!clyde!burl!ulysses!harpo!seismo!hao!hplabs!tektronix!uw-beaver!uw-june!emma
From: emma@uw-june (Joe Pfeiffer)
Newsgroups: net.auto
Subject: Re: Liquid Wrench
Message-ID: <1346@uw-june>
Date: Mon, 30-Apr-84 14:55:33 EDT
Article-I.D.: uw-june.1346
Posted: Mon Apr 30 14:55:33 1984
Date-Received: Fri, 4-May-84 02:45:04 EDT
References: <309@astrovax.UUCP> <61@infopro.UUCP>
Organization: U. Washington, Computer Sci
Lines: 7

I don't have a can in front of me, but I believe their specific
recommendation is to put the can in about 100 or so miles before
changing the oil.  I'd guess that this could clean off various
depsosits of crud, and sounds reasonable.  Not that I've ever had the
courage to actually try it!  Just by the way, the best way to quiet
noisy valves is to adjust valve lash or replace lifters.

-Joe P.