Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site fortune.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxl!ihnp4!fortune!tierney
From: tierney@fortune.UUCP
Newsgroups: net.cycle
Subject: Re: Electronic ignition for older bikes - (nf)
Message-ID: <3336@fortune.UUCP>
Date: Thu, 17-May-84 19:06:02 EDT
Article-I.D.: fortune.3336
Posted: Thu May 17 19:06:02 1984
Date-Received: Fri, 18-May-84 06:53:22 EDT
Sender: notes@fortune.UUCP
Organization: Fortune Systems, Redwood City, CA
Lines: 26

#R:ihuxq:-90900:fortune:3000001:000:785
fortune!tierney    May 17 15:39:00 1984

***** fortune:net.cycle / ihuxq!redbud /  6:14 am  May  1, 1984
I have a 75 Honda 400F motorcycle that I have considered putting
electronic ignition on.  I understand that I can put it in for about
$75 dollars and 15 minutes worth of work.  Has anyone out there done
anything similar and could give me some advice.  Thanks in advance.
					Al Kelkhoff
					ihuxq!redbud
					
----------

Yeah, I (once) had a Honda CB750K6 (750/4) to which I added
an electronic ignition.

I recommend adding the system, as performance goes 'way up.

BUT:  after you install your new ig., ride around the block 
      for a few hours.  The deal is that if the unit is going 
      to fail, it will generally fail immediately, or in 5 years.
      So, stay close to home for a while.

      Good Luck!