Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 (Tek) 9/26/83; site tekecs.UUCP
Path: utzoo!watmath!clyde!akgua!mcnc!decvax!ittvax!dcdwest!sdcsvax!bmcg!cepu!trwrba!trwrb!sdcrdcf!hplabs!tektronix!orca!tekecs!pauls
From: pauls@tekecs.UUCP
Newsgroups: net.micro
Subject: Re: clocked FF from PAL16L8
Message-ID: <3748@tekecs.UUCP>
Date: Sat, 5-May-84 12:37:15 EDT
Article-I.D.: tekecs.3748
Posted: Sat May  5 12:37:15 1984
Date-Received: Wed, 9-May-84 01:16:43 EDT
References: <4577@amd70.UUCP> <6307@lanl-a.UUCP> <588@vax1.fluke.UUCP>
Organization: Tektronix, Wilsonville OR
Lines: 12

There are lots of us interested in programmable logic.  However, the
way to start a new newsgroup is to discuss the subject in net.micro
until those not interested suggest that we form our own news group.

In my design group we have implemented asynchronous sequential circuits
using PAL16L8's and PAL20L8's.  I suspect that most of the circuits
that have traditionally used clocked flip-flops could be put into PAL's
that use internal feedback to form R-S latches.  It has worked fine for
us but I have not found others that use non-registered PAL's this way.

					Paul Sweazey
					tektronix!tekecs!pauls