Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site lanl-a.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!harpo!seismo!cmcl2!lanl-a!sct
From: sct@lanl-a.UUCP
Newsgroups: net.micro
Subject: Re: Re: PAL programmer
Message-ID: <7525@lanl-a.UUCP>
Date: Fri, 18-May-84 11:28:07 EDT
Article-I.D.: lanl-a.7525
Posted: Fri May 18 11:28:07 1984
Date-Received: Sat, 19-May-84 01:42:30 EDT
References: <2506@ecsvax.UUCP>
Organization: Los Alamos National Laboratory
Lines: 11


  We evaluated the PALASM module for the DATA I/O and were not impressed.
There were a lot of problems with it.  I still believe that the best bet
is to have PALASM on a host machine.
  MMI is sampling the new 32R16 now.  This is a 1500 gate equivalent PAL
with 16 inputs and 16 outputs (128 product terms) with a max prop delay
of 35 ns.  It comes in a 40 pin dip.  We will try to get a sample but are
not sure how we will program it as DATA I/O does not have a module for it
yet.  The 64R32 should be out later this year (?) and have a 5000 gate
equivalent.  MMI will also have a CMOS version.
  PALASM ver 2 is supposed to be out now but our salesman has not seen
it yet.