Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!akgua!mcnc!decvax!harpo!ihnp4!zehntel!hplabs!sri-unix!jeffj@ARDC.ARPA
From: jeffj@ARDC.ARPA
Newsgroups: net.micro.apple
Subject: Apple IIe modem hookup
Message-ID: <1072@sri-arpa.UUCP>
Date: Tue, 22-May-84 09:17:32 EDT
Article-I.D.: sri-arpa.1072
Posted: Tue May 22 09:17:32 1984
Date-Received: Fri, 1-Jun-84 05:46:40 EDT
Lines: 19

From:      "Jeffrey J. Josephson" (MISD-MAD) <jeffj@ARDC.ARPA>

         Has anyone ever used the Hayes Smartmodem 1200 ?  I tried
to but couldn't get it to work.  I connected the RS232c cable from
the modem to the Dispatcher, which was placed into slot number 2.
I had pin 4 of the Dispatcher up because the mainframe to which I 
will be connected to is 1200 baud.  I then turned to page 2-9 of
the Hayes "Smartmodem 1200 Hardware Reference Manual", and tried
the initial checkout.  The response should be "ok", but I got
"syntax error".  Even though I got this message, I was able to
dial out and hear a computer tone, but unable to received any
prompts from the mainframe.  The mainframe is for half duplex.
To dial out I used "AT Ds" and to call the modem typed "PR#2".

Any solution on how to access a computer with this particular modem
and Apple IIe computer will be most helpful.

Send mail to either info-apple@brl-tgr or send it directly to me
using jeffj@ardc.