Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.1 6/24/83; site ssc-vax.UUCP Path: utzoo!watmath!clyde!burl!ulysses!mhuxl!houxm!hogpc!houti!ariel!vax135!cornell!uw-beaver!ssc-vax!wanttaja From: wanttaja@ssc-vax.UUCP Newsgroups: net.micro.cbm Subject: re:Word Processing &64 Message-ID: <146@ssc-vax.UUCP> Date: Wed, 16-May-84 17:51:26 EDT Article-I.D.: ssc-vax.146 Posted: Wed May 16 17:51:26 1984 Date-Received: Thu, 17-May-84 07:11:38 EDT Organization: Boeing Aerospace, Seattle Lines: 29 <****> I have owned my 1541 for nearly a year, and have just had to repair it when I rode it into the ground during a 12 hour computing session. It cost $60 to repair (repair by local company) and seems to be working OK now. By current list prices, I still have spent less than the price of an MSD drive. I suggest waiting for the new 1542 drive, which has the same specs but replaces the idiotic disk clamp system with a "turn lever to latch" type. I have used the Gazette program, "Speedscript", quite a bit, and am happy with it (especially for the price). I have written up to 20 page documents with it, and my only complaint is that the insert function is very slow if you insert something near the beginning of a long document. One glitch I've found, the first time after powerup that I try to print a document, the printer dumps some garbage first. It works normally after that. For a printer, unless you have specific need for true letter quality, I suggest sticking with dot matrix. My Gemini 10X cost $290 (plus $70 for CARDCO-G interface) and has good print quality, expecially in the Doublestrike/emphasised modes. The advantage of a dot matrix is, of course, speed. That 20 page document I refered to earlier printed out in about twenty minutes, at about 60 CPS. The equivalent time required for a 13 CPS daisy wheel is left as an exercise for the student. A daisy wheel is also obviously much better for program listings, too. Ron Wanttaja (ssc-vax!wanttaja)