Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!vaxine!wjh12!genrad!decvax!ittvax!dcdwest!sdcsvax!sdcrdcf!hplabs!sri-unix!towson@Amsaa.ARPA
From: towson@Amsaa.ARPA
Newsgroups: net.micro.cpm
Subject: Re:  HELP WITH DATA TRANSFER
Message-ID: <12510@sri-arpa.UUCP>
Date: Thu, 19-Apr-84 22:43:11 EDT
Article-I.D.: sri-arpa.12510
Posted: Thu Apr 19 22:43:11 1984
Date-Received: Fri, 11-May-84 00:16:32 EDT
Lines: 13

From:      David Towson (CSD) <towson@Amsaa.ARPA>

Ron - I'm going to take a stab at your problem.  MDM7xx MUST have an 8-bit
data path to work.  This is because of the way the sector numbers are sent
from transmitter to receiver, and has nothing to do with the type of data
(ASCII text or binary) being sent.  I do not know what Kermit needs, or whether
you have an option of 7 or 8 bits with Kermit.  Perhaps someone else will 
comment on that.  My question, then, is, are you using an 8-bit transfer
path?  If not, I think that's your problem.


Dave
towson@amsaa