Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!vaxine!wjh12!genrad!decvax!ittvax!dcdwest!sdcsvax!sdcrdcf!hplabs!sri-unix!"MortonJim"@LLL-MFE.ARPA
From: "MortonJim"@LLL-MFE.ARPA
Newsgroups: net.micro.cpm
Subject: NEED CPD DIAL CODE
Message-ID: <345@sri-arpa.UUCP>
Date: Wed, 2-May-84 11:01:00 EDT
Article-I.D.: sri-arpa.345
Posted: Wed May  2 11:01:00 1984
Date-Received: Sat, 12-May-84 02:22:47 EDT
Lines: 11


 I have a Signalman Anchor modem, which used controlled pulse dialing. 
This means that there is an RS-232 Pin which if i set the modem is "off hook"
and if i reset the modem is "on hook". You dial a number by pulsing the 
line hi and low for the appropriate number of times for each digit of the 
phone number. 
    I need a 8080 or z80 code to dial this modem, preferably one that is 
compatible with mdm7whatever.  If there are no such codes, I will write one
but would like to avoid re-coding the wheel so to speak.
          Thanks in advance for any help,
                Jim Morton