Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!vaxine!wjh12!genrad!decvax!ittvax!dcdwest!sdcsvax!sdcrdcf!hplabs!sri-unix!haddock%ti-csl.csnet@csnet-relay.arpa
From: haddock%ti-csl.csnet@csnet-relay.arpa
Newsgroups: net.micro.pc
Subject: Hayes Modem Setup for Venix
Message-ID: <12265@sri-arpa.UUCP>
Date: Mon, 9-Apr-84 05:24:00 EDT
Article-I.D.: sri-arpa.12265
Posted: Mon Apr  9 05:24:00 1984
Date-Received: Sat, 12-May-84 02:18:35 EDT
Lines: 13

From:      Rusty Haddock <haddock%ti-csl.csnet@csnet-relay.arpa>

First, flip switch #5 UP.  This will set S0=1 on power up.

If you get no carrier try flipping the switch that forces the Carrier
Detect (CD) line high.  The switch # escapes me.  UNIX likes to see a
carrier before it'll start talking to a tty port.  There's another
that forces the DTR pin high; you may as well try that one too.

I've been using a Hayes SmartModem 1200 but if you're using the
300-baud only version the switches may be different.

-Rusty-