Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site eneevax.UUCP
Path: utzoo!watmath!clyde!akgua!sdcsvax!sdcrdcf!hplabs!hao!seismo!rlgvax!cvl!umcp-cs!eneevax!ravi
From: ravi@eneevax.UUCP
Newsgroups: net.micro,net.micro.pc
Subject: Sritek Coprocessor Boards
Message-ID: <125@eneevax.UUCP>
Date: Thu, 24-May-84 17:44:12 EDT
Article-I.D.: eneevax.125
Posted: Thu May 24 17:44:12 1984
Date-Received: Fri, 1-Jun-84 03:27:23 EDT
Organization: Univ. of Maryland, EE Dept.
Lines: 15
Xref: 1526 451

<>
I am considering getting their 16032 coprocessor board for the
pc. I would like to know if anybody has had any experience with
the Sritek boards in general and the 16032 board in particular.
I would be interested in details such as hardware reliability,
quality of the unix port(especially the 4.1 port), ease of
configuring new device drivers, communication between the two
processors and external devices, and performance of the
coprocessor running unix with the small amount of available
memory (<512k). If there is sufficient response I will summarize
and post to the net. Thanks in advance.

-- 
ARPA:   ravi%eneevax%umcp-cs@CSNet-Relay
UUCP:   [seismo,allegra]!umcp-cs!eneevax!ravi