Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site harvard.UUCP
Path: utzoo!linus!vaxine!wjh12!harvard!sasaki
From: sasaki@harvard.UUCP (Marty Sasaki)
Newsgroups: net.wanted,net.unix-wizards
Subject: Sytek Network
Message-ID: <257@harvard.UUCP>
Date: Tue, 29-May-84 11:28:48 EDT
Article-I.D.: harvard.257
Posted: Tue May 29 11:28:48 1984
Date-Received: Fri, 1-Jun-84 08:00:11 EDT
Organization: Aiken Computation Lab, Harvard
Lines: 22

Harvard has installed the Sytek LocalNet 20 hardware. We need help
with the following:

    o	We have determined that EIA flow control is the most appropriate
	for most communication between computers. The problem is that
	most multiplexors don't support this adequately in hardware. A
	preliminary look at the software seems to indicate that modifications
	would be difficult and might not work (polling seems to take too
	many cpu cycles).

    o	We would like to put a high speed machine to machine network onto
	the same cable that the Sytek stuff runs on. Ideally this would
	be an ethernet-style board. We plan on running TCP/IP on the hardware.

Any suggestions are welcome.

We have Vaxen running 4.2 BSD and VMS, and PDP-11/70's running V7 and 2.9 BSD.

Thanks in advance.

			Marty Sasaki
			...decvax!genrad!wjh12!harvard!sasaki