Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site tesla.UUCP
Path: utzoo!watmath!clyde!burl!mgnetp!ihnp4!houxm!houxz!vax135!cornell!tesla!jeff
From: jeff@tesla.UUCP
Newsgroups: net.auto
Subject: Morgan stabilizer blades
Message-ID: <394@tesla.UUCP>
Date: Fri, 29-Jun-84 15:46:04 EDT
Article-I.D.: tesla.394
Posted: Fri Jun 29 15:46:04 1984
Date-Received: Sun, 1-Jul-84 06:47:16 EDT
Sender: jeff@tesla.UUCP
Organization: Cornell Electrical Eng.
Lines: 8

From: jeff (Jeff Frey)
Has anyone had any experience in adjusting the front stabilizer blades
in a Morgan?  They are supposed to be adjusted with shims in order to
tighten up the front end.  But then, I don't even know what they look
like much less how you know (except by driving the car) that they're
properly adjusted.  
I would appreciate any information on this somewhat arcane subject.
Jeff Frey