Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site sdccs6.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxl!houxm!houxz!vax135!petsd!pesnta!hplabs!sdcrdcf!sdcsvax!sdccs6!ix41
From: ix41@sdccs6.UUCP (Geoffrey R. Walton)
Newsgroups: net.general,sdnet.computing
Subject: Termcap wanted for C-64
Message-ID: <1652@sdccs6.UUCP>
Date: Tue, 24-Jul-84 12:43:53 EDT
Article-I.D.: sdccs6.1652
Posted: Tue Jul 24 12:43:53 1984
Date-Received: Fri, 27-Jul-84 07:50:38 EDT
Organization: U.C. San Diego, Computer Center
Lines: 17

I posted this request about three months ago, and received
little or no response, soooo . . . I thought I'd try again.
Does anyone have (know of?) a termcap (either public or
personal) which allows full vi using a C-64 and Vicmodem as a
dialup remote terminal?  I've become adept at using open mode,
but would rather not be limited to the single-line window and
other constraints of such use.
     For anyone else using this hardware combination, there are
     a few tricks I've stumbled over in my efforts, and which
     I'll gladly share.

     Thanks, in advance,
     Geoffrey Walton
     Dept. of Literature
     UC San Diego
     ...!sdcsvax!sdccs6!ix41
     ...!sdcsvax!sdccs6!walton