Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site qubix.UUCP
Path: utzoo!linus!decvax!decwrl!sun!idi!qubix!msc
From: msc@qubix.UUCP (Mark Callow)
Newsgroups: net.micro
Subject: Re: Hayes Smartmodem carrier detect
Message-ID: <1242@qubix.UUCP>
Date: Wed, 11-Jul-84 14:04:39 EDT
Article-I.D.: qubix.1242
Posted: Wed Jul 11 14:04:39 1984
Date-Received: Fri, 13-Jul-84 01:04:34 EDT
References: <492@trwspp.UUCP>
Organization: Qubix Graphic Systems, Saratoga, CA
Lines: 22

I don't know what you were smoking when you read the manual....

If you set dipswitch 6 down you get the behaviour you mention.
If you set dipswitch 6 up pin 8 will folow the state of the carrier
on the phone line.

Read Table 3 on pages 8-3 and 8-4 of the manual.

You took the statement

	"The Smartmodem 1200 will always act as if a carrier is present".

totally out of context.  It was describing the behaviour when
you set the timeout value in *register* s10 to 255.

	Mark
-- 
From the TARDIS of Mark Callow
msc@qubix.UUCP,  decwrl!qubix!msc@Berkeley.ARPA
...{decvax,ucbvax,ihnp4}!decwrl!qubix!msc, ...{ittvax,amd70}!qubix!msc

"Nothing shocks me.  I'm an Engineer."