Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10 5/3/83; site rocksvax.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxl!houxm!houxz!vax135!cornell!uw-beaver!tektronix!hplabs!hao!seismo!rochester!rocksanne!rocksvax!dave
From: dave@rocksvax.UUCP (Dave Sewhuk)
Newsgroups: net.audio,net.music
Subject: Re: speeding up sound
Message-ID: <216@rocksvax.UUCP>
Date: Wed, 18-Jul-84 11:06:00 EDT
Article-I.D.: rocksvax.216
Posted: Wed Jul 18 11:06:00 1984
Date-Received: Fri, 20-Jul-84 03:34:54 EDT
References: <318@harvard.ARPA> <273@loral.UUCP>
Organization: Xerox
Lines: 35

You grab small chunks of audio sampled at rate X, throw away some of
the samples.  You buffer the samples up so that they can be played out
at a steady, slower rate and record them at this slower rate.  When you
play back the recording, you use the normal rate, remember they were
sampled originally at this rate so no pitch change, and you end up
speeding up the audio rate without changing the pitch, due to the
thrown away samples.  This works well with voice because you can
cleverly find the spaces and throw away more data in the spaces than in
the voice.  This makes the person talk more like the Federal Express
guy.  You always reduce the bandwidth going in thus keeping the process
from making something from nothing.

I heard an article using this technique on "All Things Considered" last
year.  They had Noel Adams read a poem that took 18 secs to read,
compressed it such that it took only 10 sec to play back.  Sounded like
Noel was talking faster...  My Yamaha CD-X1 uses that technique to
acheive fast forward/reverse.  You hear snips of music at the proper
pitch, only much faster.  You hear the snips when you take out too much
data, which for fast forward is OK.

As for independently changing pitch you use a balanced mixer and a low
pass filter to to translate the baseband pitches to any other frequency
you want.  Audio goes in 1 port a signal generator in the other.  If
you set signal gen to 1Khz you translate all incoming frequencies
1Khz.  Theory for this is found in any communications book and is the
basis for AM broadcasting, only they use signal generator in the Mhz
region.  By using complex waves as the translate frequency you can make all
the sci-fi voices you ever wanted to hear, great fun to do...

Hope that clears up those operations.  
-- 
Dave

arpa: Sewhuk.HENR@Xerox.ARPA
uucp: {allegra,rochester,amd,sunybcs}!rocksvax!dave